When looking to install a faucet, there are a number of steps that you should follow so that it is properly put in place to work. While you can install a sink by yourself, it is still a good idea to hire a professional from Allen Plumbing Company Texas. By using a professional plumber, you will be able to ensure that your new faucet is installed and will be able to meet your needs. According to Allen Plumbing Company Texas, there are several key steps that you should follow whenever you are looking to install a new faucet.
READ THE INSTRUCTIONS
The first step in installing a new faucet is to read the instructions. With the instructions, you will have all of the information you need in order to properly install the faucet. As long as you follow the steps, you should be able to complete the process of a faucet installation.
DETERMINE THE SOURCE
One of the key steps in faucet installation is to determine the source of where the water is coming from. If you are looking to fix or replace your faucet, you will need to find the source of any problem with it. If your faucet has weak pressure or flow, then getting a new faucet isn’t necessary. Whenever your faucet is weak with both hot and cold temperatures, then it is likely clogged. All you need to do is remove the faucet and clean it out. Whenever one of the temperatures is weak, then you will need to replace the valves.
MEASURE BEFORE YOU SHOP
Before you decide to buy a new faucet and install it, it is very important to measure before you shop. You will need to check the configuration and spacing on the sink. In order to properly measure the sink, measure from the center of each handle. The spacing of a faucet is between 4 and 8 inches. Once you confirm the length, then buy a faucet that is of this exact measurement.
GET ALL NECESSARY TOOLS AND SUPPLIES
Once you buy the faucet and take it home, you will need to get all of the tools and supplies necessary to complete the installation. You will need tools such as a basin wrench and all of the items that come with the faucet in the package. With all of the tools and supplies, you will then be able to begin installing your new faucet.
INSTALL THE FAUCET FIRST
When you get the faucet and bring it to your home, you will want to install the faucet before you put anything else together. You will want to put the faucet on top of the sink and put the wires under the sink to see how it will look. This provides you with how it will be placed when it is completely installed. Once you get the faucet aligned, then you then make the connections to put it firmly in place.
TEST THE SHUTOFFS
The next step in the installation process is to test the shutoffs. In this situation you will need to check the shutoff valves under the sink. It is important to determine if they still work. Any shutoffs that don’t stop the flow of water will need to be replaced.
CLEAN THE TOP OF THE SINK
Right before you install the faucet, clean the top of the sink in order to eliminate any rust or stains. This will help keep the sink clear of any debris and allow for an easy installation.
CHECK FOR LEAKS
The final step of the installation process is to check for leaks. You will first need to turn on the water and see if it runs through the faucet. While the water is running, check under the sink to see if there is any water dripping. Whenever water drips, it will be necessary to check the valves and pipes to see where the leak is coming from. A good thing to do is tighten or replace the valves and try it again. If there aren’t any leaks then the process is complete and you are ready to use your new faucet.